The plumbing final checks the finished fixtures and equipment: fixtures set, sealed and leak-free, hot on the left and cold on the right, drains flowing, the water heater strapped with its relief valve discharged properly, an expansion tank where required, and the gas test pressure and water temperature at a fixture recorded.
Fixtures, water heater and flow before final.
| Fixtures | PASS | FAIL | N/A |
|---|---|---|---|
| Fixtures set, sealed and secure | |||
| No leaks at supplies and traps | |||
| Hot on left, cold on right | |||
| Drains flow freely |
| Water heater & gas | PASS | FAIL | N/A |
|---|---|---|---|
| Water heater strapped, T&P discharged properly | |||
| Expansion tank installed if required | |||
| Gas test pressure psi | |||
| Water temperature at fixture °F |
Run this checklist free on your phone, with photos and signatures: myBivy for Trades at srene.io. A field checklist, not the code; follow the code and amendments your jurisdiction has adopted.
This is a field checklist, not the code. Your inspector enforces the code and local amendments your jurisdiction has adopted.
Fixtures, leaks, drains, the water heater and its safety devices, and any gas piping test. This checklist walks each one.
Many codes and specs limit hot water temperature at fixtures to prevent scalding. Writing the reading down shows you checked it.
On this checklist: the plumber's QC check, the GC and the plumbing inspector.
Yes. It's built into myBivy for Trades, free for up to 5 people: Pass, Fail or N/A on each item, notes, photos and readings, signatures on site, and a clean PDF for the GC.
This checklist is built into myBivy for Trades: Pass, Fail or N/A on every item, notes, photos and readings, the GC signs on site, and a clean PDF goes out the same day. Free for up to 5 people.
The inspection checklist app · All free trade checklists · Free field forms